BALL VALVE- Select from the range of IVE Ball Valves

Ball Valve

 

Ball Valve

Ball valves are On-Off valves and also known as Shuts off valves and are used for flow control in On-Off fashion. These valves are used in utilities like water, air and steam pipe line.

IVE offer Ball valve in the following design variations

  • Single piece design Ball valve
  • Two piece design Ball valve
  • Three piece design Ball valve
  • Jacketed Ball Valve
  • Flush Bottom Ball Valve
  • Three way & Four Way ball valve ; & PTFE lined ball Valve. With pressure rating of 150# to 1500#
  • “IVE” Ball Valves are available in size Range ¼” (6mm) to 8” (200 mm)

All  IVE Ball Valve offer the following benefits

  • Long Life & High Performance
  • Compact & standard Design with low pressure drop across the valve
  • No Lubrication required for quick & positive shut off with low Torque
  • Blow out Proof Stem, with antistatic device

ONE PIECE DESIGN BALL VALVE

SINGLE PC DESIGN BALL VALVE SCREWED ENDS

SINGLE PC DESIGN
BALL VALVE SCREWED ENDS

“IVE” One piece design ball valves is offered in NO-JOINTS design.

This design assures highest leak proof characteristic. It is generally preferred in the pipe lines carrying hazardous or toxic liquids.

Features and Benefits of Single Piece Ball Valve

  • “IVE” screwed end or Triclover Type end Ball Valves are available in the sizes of ¼” (6mm) to 2” (50 mm).
  • Single piece ball valves are offered in screwed & Triclover Type end connection. Screwed valves are generally used in the smaller diameter lines having low pressure & frequent on/off operations.
  • Ball valves are either casted or fabricated from Bar Stock.
  • They are Rigid & Compact in construction & easy to operate.

Please note

  • Single piece design make maintenance of the single piece ball valve difficult as compared to two or three piece ball valve design.

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

TWO PIECE DESIGN BALL VALVES

TWO PIECE DESIGN BALL VALVE FLANGED ENDS

TWO PIECE DESIGN
BALL VALVE FLANGED ENDS

Key Features and Benefits

  • “IVE” Two piece design Ball valves Flanged ends are available in the sizes from ½” (15mm) to 8” (200 mm)
  • Two piece ball valves are offered with Single sealing joints design. This design offers better leak proof characteristics then three piece design ball valves but no better than single piece design.
  • Two piece ball valves are made from High quality Investment castings procured from the reputed foundries.
  • Compact Design, superior Quality and interchangeability makes it most versatile valves.
  • Easy for maintenance as compared to single piece design.

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

THREE PIECE DESIGN BALL VALVES

THREE PIECE DESIGN BALL VALVE SOCKET WELD ENDS

THREE PIECE DESIGN
BALL VALVE SOCKET
WELD ENDS

Key Features and Benefits

  • “IVE” Three piece design Ball valves are available in the sizes from½” (15mm) to 8” (200 mm)
  • Three piece design Ball valves offered in Flanged end, Screwed ends & socket weld Ends.
  • Made from superior quality Investment castings made by reputed founders in India.
  • Most easy for maintenance as compared to single and two piece design valves.

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

JACKETED SINGLE PIECE DESIGN BALL VALVES

JACKETED BALL VALVE FLANGED ENDS

JACKETED BALL VALVES
FLANGED ENDS

Certain types of fluids may get solidify or crystalize while passing through the valve. In such condition heating or cooling to the flowing fluid in the valve can be provided by circulating steam, oil or water in the jacket of the single piece design ball valve. Heating or cooling of the flowing fluid will assure the smooth flow of the fluid within the valve.

“IVE” Manufactures High precision Jacketed Ball valves.

Key Features and Benefits

  • Jacketed Ball Valves are available in the sizes from½” (15mm) to 4” (100 mm)
  • The Jacket extends from in- between the Body flanges.
  • The Flanges of Jacketed valves are one size higher than the Bore Size. For example for 2” Bore Size, we will require 3” flange, hence the size of the valve will be specified as 2” x 3”.
    • Jacket is provided with ½” BSP (F) inlet, outlet and drain (Optional) Nozzles.
    • Also available with Flanged Nozzles
    • Option of CS or SS jacket as per requirement.

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

ACTUATED BALL VALVES

ACTUATED JACKETTED BALL VALVE FLANGED ENDS

ACTUATED JACKETTED BALL
VALVES FLANGED ENDS

The operation of all type of “IVE” ball valves can be automated.

“IVE” can offer complete automation solution for the precise process control and also to integrate the working of ball valves with the rest of plant automation system.

Key Features and Benefits

  • Get precise process control with valve automation solution.
  • Depending on the size of the ball vale to be controlled, you can choice form valve On/Off variants such us Manual and Geared controlled or with Pneumatic, Hydraulic, Electrical actuation for the precise flow control.
  • “IVE” valves offered Valve Automation solution with Rotary Quarter Turn Single acting or Double acting Actuators and other accessories such as Solenoid valves, Limit Switches, Positioners, and Manual Overrides & Electrical Actuators.
  • Locking facility is also available upon request.
  • IVE” Actuated Ball Valves are available in the range from ¼” (6mm) to 8” (200 mm)

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

THREE WAY BALL VALVES WITH “L” PORT & “T” PORT DESIGN

3 WAY BALL VALVE FLANGED ENDS

3 WAY BALL VALVES
FLANGED ENDS

Three way ball valves are also known as Mixing or diverting valves. It is widely used in Chemical, Pharma industry for liquid mixing application and also used to divert liquid as per process requirement.

“IVE” Provides a perfect solution for Mixing and diverting the flowing media.

Key Features and Benefits

  • “IVE” offers “L” Port & “T” Port valves design in 3 way construction.
  • 3 way valves reduce capital cost and save the space also.
  • “IVE” 3 way valves are easy & precise to operate.
  • Available in the range from ¼” (6mm) to 4” (100 mm)

Download Cataloge/ drawing for

For more information on BS/ ANSI standards and Material of construction refers technical data.

Or Call Sanjay- on -0091-9819134484

Send email

FLUSH BOTTOM BALL VALVES

FLUSH BOTTOM BALL VALVE FLANGED ENDS ACTUATED

FLUSH BOTTOM BALL
VALVE FLANGED ENDS

Flush bottom ball valves are also known as bottom valves or drain valves. As the name suggest, it is used to flush out the liquid or slurry from the bottom of Reactors, Receivers & Huge Tanks.

“IVE” flush bottom valves assure perfect drain of the liquid / slurry from the tank. The unique design of the flush bottom ball valves will prevent formation of the dead area in the valve, hence no hold up area in the tank or vessel. This is achieved as ball of the valve will comes in the level with the inlet flange.

“IVE” offers following types of Ball valves:

  1. Lined flush bottom ball valves
  2. Actuated ball and Y type flush bottom valves

We also offer other variation of flush bottom valves. Visit www.flushbottomvalves.net to get more information, catalog, drawings for the flush bottom valves.

PTFE LINED BALL VALVES

FEP PFA LINED FLUSH BOTTOM BALL VALVE FLANGE ENDS, ACTUAED

FEP PFA LINED FLUSH
BOTTOM BALL VALVE

FEP / PFA Lined Flush Bottom Ball Valves have 3 to 5 mm thick flouro polymers lining which is Anti corrosive as well as food grade. Lined Flush Bottom Valves found wide application in Chemical as well as pharmaceutical Industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life.

Key Features and Benefits:

  • “IVE” flush bottom valves suitable for corrosive as well as food grade application.
  • FEP/ PFA lining available up to 5mm thick. Tested up to 10 KVA.
  • Valves available in the size from 1” (25mm) to 6” (150 mm).
  • Operation of flush bottom valve can be automated with pneumatic cylinder and useful accessories.

Important points about IVE Ball Valves

Technical Standards and Information

These “IVE” Ball Valves are available in

Screwed Ends (BSP, NPT) : ANSI B 1.20.1
Flanged Ends : ANSI B 16.5 / BS-10 TABLE / DIN / IS STD.
Socket Weld Ends : ANSI B 16.11
Butt Weld Ends : ANSI B 16.25
Tri-clover TYPE Ends : ASME – BPE
Valve Design : BS EN ISO 17292
Valve testing : BS EN 12266

“IVE” Manufactures soft seated Ball valves with variety of seating material to withstand temperature from -30 C to +260C. “IVE” uses Virgin PTFE, Glass Filled PTFE, Carbon Filled PTFE, PEEK Filled PTFE, Delrin, PEEK® to achieve these temperatures.

Material Of Construction

“IVE” Offer different metallurgy as per the end user requirement. It can be made available in variety of metal & polymer combination

CAST IRON :IS 210 FG 200 WITH SS 410/ SS 202 TRIMS
CAST CARBON STEEL : ASTM A 216 WCB / WCC WITH SS 410 / SS 202 / SS 304 TRIMS
FORGED CARBON STEEL : ASTM A 105 Gr. B
CAST STAINLESS STEEL : ASTM A 351 Gr CF-8 / CF-8M/ CF-3 / CF-3M / CN-7M/  HAST ALLOY & OTHER AVAILABLE METALS

P.S- Valves can also be fabricated as per the requirement

Automation Control

Depending on size of the ball vale to be controlled, you can choice form valve On/Off variants such us Manual, Geared and automated actuation for the precise flow control.

We offers Valve Automation solution with Rotary Quarter Turn Single acting or Double acting Actuators and other accessories such as Solenoid valves, Limit Switches, Positioners, Manual Overrides & Electrical Actuators.

Locking facility is also available upon request.